Negative value received for an expected positive value. '$' system command was not recognized or supported. Numeric value format is not valid or missing an expected value. G-code words consist of a letter and a value. Error Codes & Descriptions ID - Error Code Description 1 The table below decribes every one of them. The X is given as a numeric error code to tell you exactly what happened. If an empty line with only a return is sent to Grbl LightDrive, it considers it a valid line and will return an ok too, except it didn't do anything.Įrror:X : Something went wrong! Grbl LightDrive did not recognize the command and did not execute anything inside that message. Ok : All is good! Everything in the last line was understood by Grbl LightDrive and was successfully processed and executed. *Why?: To avoid end-user problems and free up more microcontroller space (Visible and everyone can edit on console) (This group is now hidden, cannot be listed with the $$ command) *Why? $0 LightDrive V3d 3 Axis Driver (For Nema17 stepper motors)įirmware Informations Technical Configurations (Hidden but everyone can edit on console)
JTECH LIGHTBURN GRBL CONTROLLER DRIVERS
Use TL OR TH According to your power supply specifics & GND Compatible Stepper Motor Drivers Stepper motor driver Warning! Please download the current version of winrar at, otherwise you may not be able to open the archive Windows driver |Įlectrical Specifications Logic Supply Voltage Screw terminal blocks: 2Pcs 6 Pin 2EDG 5.08mm
If the mechanical problems cannot be corrected, you can try to correct the dimensions by playing with $100 and $101 values. If your drawing dimensions are different after measured according to these calculation results, check your mechanic problems. Once you're happy with the selections above you can copy and paste the followings into console:
JTECH LIGHTBURN GRBL CONTROLLER UPDATE
Press here if the numbers below don't update automatically:
0 kommentar(er)
